Blog


What should I do if some parts of the industrial fast door are worn?

With the use of industrial fast door more and more common, everyone in the process of using industrial fast door, it is inevitable that there will be parts wear. What should I do if some parts of the industrial fast door are worn?

 

With the use of industrial fast door more and more common, everyone in the process of using industrial fast door, it is inevitable that there will be parts wear. Then industrial fast door parts wear and tear?
As an indispensable energy-saving product in modern industry, the cost of industrial fast door is not cheap. In order to save costs and reduce maintenance costs, users who use industrial fast doors should master certain knowledge of daily use and maintenance, and extend the service life of industrial fast doors as much as possible.
Safety has always been a great concern for users of industrial PVC fast doors, so we should pay attention to the safety device parts of industrial fast doors and check them regularly. The rotating parts of the machine require sufficient lubricant. If the lubricant is insufficient, it should be added in time to prevent excessive wear of the parts and affect the daily use of the fast door. And industrial fast door often wear accessories have the following, we continue to look down.
1. Sealing ring
The sealing ring is the key part between the piston rod of the sealing cylinder and the cylinder barrel, and is generally equipped with an imported sealing ring. Mainly do sealing, long-term use will appear wear-resistant. 70% of the oil cylinder oil leakage occurs on the oil seal. If the oil cylinder oil leakage is found, check it in time. If the sealing ring is aged and damaged, replace the sealing ring.
2. Electric control switch
When operating, the electronic control switch is the main operating button, and the frequency of use is very high. If the button fails, stop working immediately and disconnect the power for maintenance. Can not be used blindly to prevent hidden dangers.
3. Struts
The support rod is the key component connecting the pump station and the pump rod. The lifting support of the hydraulic cylinder and the handling bearing of the cargo are supported and balanced by the support rod. Because in the handling of goods may be overloaded, partial load and other phenomena often lead to strut deformation or fracture.
4. Oil cylinder
The oil cylinder plays a vital role in the whole process of fast door lifting, and it is also used to realize the lifting of goods.
5. Tires
Fast door tires are a kind of wear products, which will wear out after long-term use. Elevator tires are also divided into many types: nylon tires, PU wheels, polyurethane-covered nylon, rubber wheels, bakelite, etc. Most elevators are equipped with nylon wheels, because the market is very common, the price is cheap, but the degree of wear is poor, and the walking noise is also loud.
6. Pump Station
The pump station is the key component of all fast doors. Once there is a problem with the pumping station, it is announced that it has stopped working. Even if other parts are good and undamaged, it is impossible to work. The pump station is composed of many parts, among which the dust ring is prone to problems and O-rings, steel balls and other accessories. Once these accessories have problems or are worn or damaged during use, they must be replaced in time.
Key words:Qingdao fast door; Qingdao Industrial Lift Gate

Latest information

Address: No.11, Yuhe 1st Road, Jimo District, Qingdao City

Business I: +86-532-82513310
Business II: +86-532-85531713

Zaozhuang office : +86-1655152288

Jinan office: +86-13854153916

Website: www.qdyymy.com
E-mail: qdyueyi@163.com

YUEYI DOORS


Copyright©2024 YUEYI DOORS  Powered by  www.300.cn  SEO