With the development of industry, people's awareness of environmental protection is also increasing day by day, fast doors are becoming more and more popular with consumers, and more and more places are used. So, how to reset the fast door after power failure

With the development of industry, people's awareness of environmental protection is also increasing day by day, fast doors are becoming more and more popular with consumers, and more and more places are used. So, how to reset the fast door after power failure?

1. Manual operation after power failure:
When the power is off, the fast door cannot operate. First, pull down the brake cable to separate the brake clutch from the motor.
Align the rocker with the lower motor and the connector to make it snap in, and then use the manual rocker to make the curtain of the fast door move up and down.
When power is restored, the motor brake and curtain must be reset.
2, the use of manual rocker must pay attention:
The fast door can not be operated by manual rocker during power-on. At this time, the fast door is at high speed. Please do not touch the relevant mechanical parts of the fast door.
After power failure, before manual operation of the fast door, the internal power supply of the controller must be turned off to prevent danger caused by sudden power failure.
After power on, press the emergency stop switch, turn on the control internal power switch, release the emergency stop switch, press the down button to start the rear door body to descend to the bottom position and stop automatically. At this time, observe whether the bottom position is suitable. If not, please turn off the internal power switch of the fast door controller, adjust the door curtain to the suitable position by manual operation, turn on the internal power supply of the controller, run, and observe whether the position is suitable.

Key words:Qingdao fast door; Qingdao Industrial Lift Gate