Automatic doors are generally used in some occasions that require frequent access by personnel (banks, government offices, halls, shopping malls, companies, etc.). Through the infrared or microwave sensor (probe) on the top of the door, it senses that someone needs to enter or leave, drives the motor, and automatically translates to open the glass door. After the personnel leave

 

Automatic doors are generally used in some occasions that require frequent access by personnel (banks, government offices, halls, shopping malls, etc.). Through the infrared or microwave sensor (probe) at the top of the door, it senses that someone needs to enter or leave, drives the motor, and automatically translates to open the glass door. After the personnel leave, the door closes automatically. This is also our common control system. What other control systems are there for these automated doors?
Our common control systems are: password fingerprint access control system, radar sensor, infrared sensor control system, manual control system, electronic button control system, etc.
The password fingerprint access control system mainly judges the identity of the operator by setting the password or fingerprint collection data to be transmitted to the control main board for identification. After processing by the control main board, it issues a door opening command to the drive motor to perform door opening and closing actions. Generally, this regular is used for company access control, community access control or family entrance doors, etc. The common one is automatic glass sliding door. Radar sensing system recognizes people or objects in designated areas through probe sensing, after the signal is collected, the execution command is directly sent to the motor to control the door opening through the control main board, and the door is automatically closed after a delay of a few seconds. If the radar sensing system is triggered during the door closing process, the door closing action stops and opens in reverse to ensure the safe operation of the door opening and closing action. Generally, this system is commonly used in shopping malls, banks, supermarkets, companies and other glass sliding doors and automatic doors, with good customer experience. This is commonly used in public places, or commercial units, companies, etc., without door opening identification restrictions, fast induction, fast door opening; infrared sensor system can be used as the main control system, the principle of action is the same as the radar sensor, can also be used as an auxiliary control system, as the door closing anti-pinch function, when closing the door, the infrared sensing system senses whether there is interference in the designated area, feedback to the control main board to continue to close the door or stop the reverse opening of the door. General doors are often used for fast doors, automatic glass doors, fast rolling doors, etc., and are mostly used for safety identification systems. The manual control system can manually control the opening and closing of the door when the automatic device fails or fails to complete the automatic operation due to power failure. The electronic button control system is widely used and uses buttons to control the operation direction, process, etc, the button has a specified command signal transmitted to the control board to control the motor; these control systems can work alone to control, can also be combined with a variety of ways to control the automatic door switch.

Key words:Qingdao fast door; Qingdao Industrial Lift Gate